• PHASE OUT

Card reader

Hotel solutions

CODE: EK-TR2-TP

  • Form
  • Flank
  • 'NF
  • Deep
  • Surface
3D
Description

The Ekinex® EK-TR2-TP card reader with RFID technology is used for access control in combination with the EK-TH2-TP card pocket. It is equipped with a bistable relay (4A@24Vac/dc), an input for potential-free contacts and a 3-colour (white, green and red) front signalling LED. The device has an integrated KNX bus communication module and is designed for flush-mounting in a wall-mounting box; it is supplied with SELV voltage via the KNX bus and requires a 12-24 Vac/dc auxiliary power supply.

Technical data
  • 30 Vdc power supply via KNX bus
  • Auxiliary power supply 12-24 Vac/dc
  • Current consumption from bus < 10 mA
Delivery

The scope of supply includes a terminal for connection to the bus line, a plastic bracket for mounting on a round or square box (hole spacing 60 mm) and two pairs of screws.

Accessories
  • Smart-card EK-TCE-10 (Ekinex® logo in black, pack of 10 cards) or EK-TCC-10 (customised with customer logo, pack of 10 cards)
  • square plate with 45 x 45 mm window
  • plastic adapter

 

Functions / Features
  • Access control via KNX bus TP (twisted pair)
  • Access authorisation following validation of the card
  • Accommodation guest management based on reservation and check-in/check-out period; management of service users based on time slots and passe- partout
  • Programmable output for activation of electric lock or as simple actuator activated by KNX telegrams
  • Signalling of validation in progress (green LED) or unauthorised card (red LED); possibility of activation for "do not disturb" or "room make-over" commands
  • Notification of validation events to supervisory system with memory buffer
  • Plastic case
  • Connection to bus line via KNX terminal
  • Recessed wall mounting on round box
  • Degree of protection IP20 (installed)
  • Weight approx. 50 g (with mounting bracket)
Configurationa and commissioning

The ekinex accédo software, dedicated to the management of accommodation and hospitality facilities (hotels, residences, guest houses or bed&breakfasts), is required for the programming of access control functions and card programming

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
FISPTR2TP2TH2TPIEXX00
MAEKTRTP2TP_EN_V1.1.0_2020_01_21
MAEKACCSW_EN_V1.3.0
APEKTRTPTH2TP
DSEKTR2TP
close
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.