KNX presence sensor for ceiling mounting

FF Series - 71 Series - 20venti Series



KNX presence sensor for ceiling mounting. 2 lighting channels (with constant brightness control), 2 HVAC channels and 1 alarm channel. Orientation light (standby). Control parameters can be set via ETS or dedicated IR remote control. Input for On/Off and dimming by KNX button. Power supply via bus. Use in home and building automation systems to KNX standard.

Detection range 3/6/12 m.

  • 2 channels for lighting, 2 channels for HVAC, 1 channel for alarm
  • Semi-automatic or fully automatic operation
  • 360° detection range
  • Measuring range from 10 to 2000 Lux
  • Settable sensitivity
  • Brightness sensor with bus output
  • Protruding prismatic lens (max. projection 15 mm)
  • Installation height approx. 2-5 m
  • Built-in depth: with cover 84 mm
  • Programming button on front panel
  • Optional IR remote control

A detailed description of the parameters can be found in the device's application manual. ETS4 or later is required for configuration and commissioning. Application program for ETS: APEKDF2TP##.knxprod or APEKDG2TP##.knxprod (## = version).