• PHASE OUT

Smart-card programmer kit for desktop

Hotel solutions

CODE: EK-TPBOX-TP

  • Smart-card programmer kit for desktop
Description
The programmer kit, suitable for reception desks in hospitality facilities such as hotels and reception centers, is equipped with an elegant frame in pre-painted aluminum in bromine gray. The kit must be used in combination with the Accédo supervision software. The kit signals to reception, by means of an acoustic signal generated by a buzzer, the detection of alarms generated by the rooms (e.g. bathroom draughts) which can be combined with supervision pages that identify in greater detail the room in which the alarm has been generated and with desktop notifications: the supervisor’s database stores the history of all alarms generated, silenced and returned to the accommodation facility.
 
The programming of the cards and the realization of the logic for the alarms require the specific configuration of the devices using the ETS program and the configuration of the Accédo supervision software. 
 
The kit is supplied with only the internal electrical connections and for the correct functioning it is necessary to make the following external electrical connections:
 
  • 12Vac power supply (transformer not included)
  • KNX bus power supply to the card programmer device EK-TP2-TP and to the universal KNX interface device EK-CC2-TP (2 IN / 2 OUT).
Functions / Features
The programmer kit performs the following functions:
  • programming smart-cards with RFID (Radio Frequency Identification) technology, 13,56 MHz frequency, Mifare Classic 1kB protocol
  • signaling via buzzer of the bathroom tie rod alarms
  • alarm silencing through manual button

 

The EK-TPBOX kit consists of the following devices:
  • n°1 KNX transponder card programmer cod. EK-TP2-TP
  • n°1 universal KNX interface EK-CC2-TP (2 IN / 2 OUT)
  • n°1 buzzer 12Vac, 5VA, anthracite color
  • n°1 push button 1P NO, 10A at 250Vac, anthracite color


The external power supply not included in the supply must be made with transformer 12Vac 1A. The card programmer and the universal interface with 2 inputs and 2 outputs must be connected to the KNX TP bus (twisted pair) by means of the red-black terminal provided.

 

Other characteristics:
  • card programming with RFID technology, 13,56 MHz frequency, Mifare protocolo, Classic 1 KB
  • 4M table-top box, color gray, with plastic housing
  • degree of protection IP20 when installed (according to EN 60529)
  • insulation class II (according to EN 60335-1)
  • climatic classification 3K5 (indoor use, dry) and mechanical classification 3M2 (according to EN50491-2)
  • device weight: 250 g
  • 4M modular device
  • dimensions 148,8 x 92 x 25,1 mm (W x H x D)

 

Environmental conditions:
  • Operating temperature: 0°C ... + 40°C
  • Storage temperature: - 10 ... + 70°C
  • Transport temperature: - 10 ... + 70°C
  • Relative humidity: 95% non condensing
Configurationa and commissioning

The Ekinex Accédo software is required for programming the cards.

EK-TPBOX-TP-EN
close
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.