Kit 30 with network analyser and Rogowski coils

DIN-Rail mount modules

CODE: EK-MEK-30

Description

The kit Ekinex® EK-MEK includes a EK-ME1-MDE network analyzer (enhanced version) and three sensors for measurement and recording of Rogowski current. Sensors are available with the following lengths: 300, 450 and 700 mm.

Rogowski coils
Transducer
  • Coil length: 30, 45 or 70 cm
  • Wire diameter: 8,3 ± 0,2 mm
  • Closing: bayonet
  • Weight: from 150 to 500 g
  • Material: thermoplastic UL94-V0
Electrical features
  • Output level (RMS): 100 mV / 1 kA @50Hz (standard)
  • Transducer resistance: from 70 to 900 Ω
  • Position error: less than ±1% of reading (with wire diameter = 15 mm)
  • Frequency: around 40 Hz at 20 kHz
  • Operating voltage: 1000 VRMS CAT III, 600 VRMS CAT IV
  • Pollution degree 2
  • Test voltage: 7400 VRMS / 1 min
Connection wires
  • Type: 2 x 0,15 mm shielded
  • Length: 300 cm
Delivery

Delivery includes a network analyzer and 3 Rogowski coils.

Functions / Features
  • Fully bidirectional four quadrants measurements for all energies and powers
  • Main electrical parameters measured and displayed for a cost effective consumption analysis
  • Version for 1 or 5A CT
  • 8 MB for data recording
  • Possibility to record MIN / AVG / MAX for instantaneous parameters
  • Possibility to record all energy counters
  • Modbus RTU / ASCII communication by RS485 port
  • Possibility to manage the instrument in remote mode by WintoolNETME1 software
 
Main features
  • Network analyzer
  • Plastic casing
  • Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols
  • Keyboard: 3 front buttons + 1 protected button
  • Screw terminal blocks connection
  • Installation on 35 mm DIN rail (according to EN 60715)
  • 4 modular units (1 MU = 18 mm)
  • Protection degree IP20 (installed device)
  • Weight 260 g
Configurationa and commissioning

Not necessary

STEKME1MDB_EN_EKINEX_SPA
STEKROG_EN_EKINEX_SPA
FISPME1BEIEDFX0_EKINEX_SPA
FISPROGIEDFEXX0_EKINEX_SPA
MAEKME1MD_EN_EKINEX_SPA
TCEKMEKxx_IT_EKINEX_SPA
DQEKME1MDE
WintoolNETME1_v2.6_Setup
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.