Digital time/astronomical switch

DIN-Rail mount modules

CODE: EK-TM1-TP

Description

The EK-TM1-TP electronic digital time switch is a KNX device for the management over time of the electrical devices. It allows time programming (periodicity: daily, weekly or annual) or astronomical programming. The device can pilot 9 different channels on KNX bus. The relay on the device replicates the channel 1 programming. Each channel can be associated with a different programming (time or astronomical). It is possible to connect via bus the EK-GPS-1 module (to be ordered separately), that captures the time and the position through the satellite system, ensuring a greater accuracy over time. The backup battery keeps the settings even in case of power failure and can be replaced through the cover (sealable).

Technical data
  • Power supply: 115 ÷ 230 Vac (-15% ÷ +10%) 50/60 Hz
  • Power consumption: 7 VA (2.6 W)
Output

1 monostable switching relay 16(10) A at 250 Vac

Delivery

Delivery includes a terminal block for connection to the bus. The optional module EK-GPS-1 has to be ordered separately.

Functions / Features
  • Plastic casing
  • LCD with backlight (active only with AC power supply)
  • Password lockable keyboard
  • 450 storable programs (900 events) divisible on 9 channels
  • Daily/weekly/monthly/yearly + astronomical programming
  • On/off, pulse, holiday, random, night (astronomical) programmes
  • Programming resolution 1 minute
  • Actions type 1B
  • Automatic update of daylight saving time (configurable)
  • Connection to bus line with KNX terminal block
  • Screw terminal blocks for connecting 230 Vac, output and GPS module
  • Lithium backup battery: 3V, CR14250 type (5-years life, replaceable)
  • Reinforced insulation between accessible parts (front) and all the other terminals
  • Protection degree IP20 (device installed)
  • Mounting on 35 mm standard DIN-rail (according to EN 60715)
  • 3 modular units (1 UM = 18 mm)
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKTM1TP##.knxprod (## = release).

APEKTM1TP01
FISPTM1TPIEGU00_EKINEX_SPA
DSEKTM1TP
close
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.