Touch&See display

FF Series

CODE: EK-EC2-TP

  • Touch&See display Touch&See display
  • Touch&See display Touch&See display
  • Touch&See display Touch&See display
  • Form
  • Flank
  • 'NF
  • 3D view
Description

Ekinex® Touch&See is a KNX device for the switching, control and display of bus functions. By means of its touch-screen and its graphical user interface, it is possible to control KNX actuators in an easy and intuitive way, to display the information coming from the KNX actuators and sensors and to perform as a room thermostat for up to 8 independent zones, receiving the measured room temperature values from the bus. The device integrates a KNX bus communication module and is designed for wall mounting boxes; it is powered by a SELV voltage directly from the KNX bus and requires an auxiliary 30 Vdc power supply.

Technical data
  • SELV power supply from KNX bus (communication)
  • 30 Vdc auxiliary power supply (screen)
Delivery

Delivery includes a terminal block for connection to the bus, a terminal block for connection to the auxiliary power supply, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) and two pairs of fixing screws. 

Accessories

The following accessories are available to be ordered separately:

square frame Form or Flank version

Code Mounting Side profile
EK-EC2-TP with square frame Form or Flank version black
EK-EC2-TP-00-NF without frame (‘NF version)
EK-EC2-TP-00-NFW white

 

Functions / Features
  • 3,5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours
  • Seven main graphic pages
  • Plastic casing
  • Connection to bus line with KNX terminal block
  • Connection to auxiliary power supply with yellow / white terminal block
  • Programming pushbutton and LED on the rear
  • Wall-mounting installation on round or square wall box
  • IP20 protection degree (installed)
  • Weight 110 g (with mounting support)
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKEC2TP##.knxprod (## = release). Available languages: English, French, German, Italian

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
STEKEC2TP_EN_EKINEX_SPA_2.0
FISPECF2TPIEXX3
  • v. 3.0 (13/06/2022)
  • PDF | 1 MB
  • Download
MAEKECF2TP_EN
  • v. 2.1 (14/11/2023)
  • PDF | 5,8 MB
  • Download
APEKEC2TP
  • v. 06 (15/04/2019)
  • RAR | 3,3 MB
  • Download
DSEKEC2TP
CEEKEC2TP
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.