Touch&See display with 2-fold pushbutton

FF Series

CODE: EK-EF2-TP

  • Touch&See display with 2-fold pushbutton Touch&See display with 2-fold pushbutton
  • Touch&See display with 2-fold pushbutton Touch&See display with 2-fold pushbutton
  • Touch&See display with 2-fold pushbutton Touch&See display with 2-fold pushbutton
  • Form
  • Flank
  • 3D view
Description

Ekinex® Touch&See with 2-fold pushbutton is a KNX device for the switching, control and display of bus functions. By means of its touch-screen and the graphical user interface, it is possible to control KNX actuators in an easy and intuitive way, to display information coming from KNX actuators and sensors and to perform as a room thermostat for a maximum of 8 independent zones. One temperature value can be measured from the integrated sensor, while the other values can be received from the bus. The integrated 2-fold pushbutton allows the on/off command of loads, the dimming of lighting devices, the control of motor drives for shutters or the execution of any other programmable command and control function. The LEDs can be chosen in the colour combinations blue / green or white / red. The device integrates a KNX bus communication module and is designed or mounting onto a wall-mounting box; it is powered by SELV voltage directly from the KNX bus and requires an auxiliary 30 Vdc power supply.

Technical data
  • SELV power supply from KNX bus (communication)
  • 30 Vdc auxiliary power supply (screen)
Delivery

Delivery includes a terminal block for connection to the bus, a terminal block for connection to the auxiliary power supply, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) or rectangular mounting box (fixing holes 83,5 mm apart) and two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

  • square rockers
  • rectangular frame Form or Flank version
Code LED colours Mounting
EK-EF2-TP blue / green with rectangular frame of Form or Flank version
EK-EF2-TP-RW red / white
Functions / Features
  • 3,5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours
  • Seven main graphic pages
  • Integrated temperature sensor
  • 2-fold pushbutton (possibility to configure up to 4 independent functions)
  • 4 freely programmable LEDs for each channel
  • 2 colour combination available for the LEDs (blue/green or red/white)
  • Plastic casing
  • Connection to bus line with KNX terminal block
  • Connection to auxiliary power supply with yellow / white terminal block
  • Programming pushbutton and LED on the rear
  • Wall-mounting installation on round,square or rectangular wall box
  • IP20 protection degree (installed)
  • Weight 130 g (with mounting support)
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKEF2TP##.knxprod (## = release). Available languages: English, French, German, Italian

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
STEKEF2TP_EN
  • v. 2.0 (13/06/2022)
  • PDF | 1,1 MB
  • Download
FISPECF2TPIEXX3
  • v. 3.0 (13/06/2022)
  • PDF | 1 MB
  • Download
MAEKECF2TP_EN
  • v. 2.1 (14/11/2023)
  • PDF | 5,8 MB
  • Download
APEKEF2TP
  • v. 04 (15/04/2019)
  • ZIP | 2,5 MB
  • Download
CEEKEF2TP
DSEKEF2TPRW
close
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.