Basic Pushbutton (NO LED) and socket point for 2-fold plate (60x55 mm module) - IT

71 Series

CODE: EK-E22-TP | EK-PWS-IT

  • Basic Pushbutton (NO LED) and socket point for 2-fold plate (60x55 mm module) - IT
  • Basic Pushbutton (NO LED) and socket point for 2-fold plate (60x55 mm module) - IT
  • Basic Pushbutton (NO LED) and socket point for 2-fold plate (60x55 mm module) - IT
  • Basic Pushbutton (NO LED) and socket point for 2-fold plate (60x55 mm module) - IT
  • Basic Pushbutton (NO LED) and socket point for 2-fold plate (60x55 mm module) - IT
  • Basic Pushbutton (NO LED) and socket point for 2-fold plate (60x55 mm module) - IT
  • Form
  • Flank
  • 'NF
  • Deep
  • Surface
DESCRIPTION

1-, 2- or 4-fold KNX pushbutton (max. 8 independent functions) with integrated room temperature controller. Mounting on round or square wall boxes. Power supply via bus. 

To be used in KNX installations for home and building automation. Bus terminal block, fixing screws and mounting support included in the delivery. 

The device has to be to completed with square or rectangular rockers and a double frame of the series form or flank (to be ordered separately). Mounting with 2-fold plates EK-P2F-... EK-D2F-... EK-S2F-...

These 2 fold plates (60x55 mm module) and frames allow to aestetically match conventional switches and socket components with the appearance of Ekinex display and pushbutton units.

SOCKET POINT
The Ekinex model EK-PWS-IT socket is a 2P + E 16 A universal device for wall installation, for 2P 2.5 A europlugs, 2P and 2P + E 10 A and 16 A Italian standard plugs, 2P + T 16 A German standard plugs, for powering household appliances.
FUNCTIONS / FEATURES

PUSHBUTTON

  • on/off switching of single loads or groups of loads
  • dimming of lighting devices
  • control of motor drives (for roller shutters, blinds, curtains, etc.)
  • logic functions
  • sending on the bus of values (temperature, brightness, etc.)
  • recalling and saving of scenes
  • switching to forced functioning (lock)

 

SOCKET POINT

  • Connection of home devices with AC 250 V ~ voltage
  • Contacts protected by shutters
  • Mounting on a round or square wall box
  • Terminals for cables with section up to 2.5 mm²
CONFIGURATION AND COMMISSIONING

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKE22TP##.knxprod (## = release). Available languages: English, French, German, Italian

CONFIGURE YOUR PRODUCT

Do you want to continue configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner