• New

Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB

71 Series

CODE: EK-E13-TP-.. | EK-PWS-FR-USB

  • Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB
  • Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB
  • Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB
  • Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB
  • Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB
  • Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB Pushbutton with thermostat and socket point for 2-fold plate (60x55 mm module) - FR USB
  • Form
  • Flank
  • 'NF
  • Deep
  • Surface
  • 3D view
Description

The 4-fold pushbutton of Ekinex® 71 series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function. Thanks to the integrated temperature sensor, the pushbutton can work as a thermostat for a room or a zone. The LED can be chosen in the colour combinations blue / green or white / red. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is powered by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Technical data
  • 30 Vdc power supply by KNX bus
  • Current consumption from bus < 15 mA
Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

  • set of 1 square rocker, 2 vertical rectangular rockers, 4 square rockers or 4 horizontal rectangular rockers 
  • double frame Form or Flank version
  • double plate with 60 x 55 mm window
  • a plastic adapter
  • metal support for installation onto round or square mounting box (fixing holes 71 mm apart)
Code LED colours Mounting
EK-E13-TP-BG blue / green with double frame Form or Flank version, without frame (‘NF version)
EK-E13-TP-RW red / white
Socket point
The Ekinex EK-PWS-USB-FR is an E-type wall-mounting device for the supply of domestic appliances up to 16 A 250 V ~. The model is equipped with a USB power supply unit, both type-A and type-C, for charging mobile phones and generally all electronic devices that can be charged via USB sockets of the same type. Charging of two devices at the same time is allowed.
Functions / Features
Pushbutton
  • 4-fold (possibility to configure up to 8 independent functions)
  • 4 freely programmable LED for each channel
  • 2 colour combination available for the LED (blue / green or red / white)
  • Room thermostat function
  • Integrated temperature sensor
  • Plastic casing
  • Connection to bus line with KNX terminal block
  • Frontal programming pushbutton and LED
  • Wall-mounting installation on round or square wall box
  • IP20 protection degree (installed)
  • Weight 70 g (with mounting support)

 

Socket point
  • Connection of home devices with AC 250 V ~ voltage
  • Contacts protected by shutters
  • Mounting on a round or square wall box
  • Terminals for cables with section up to 2.5 mm²
  •  USB Type-A and Type-C ports for charging electronic devices such as smartphones, tablets, etc.
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKE12TP##.knxprod (## = release). Available languages: English, French, German, Italian.

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
STEKE13E23TP_EN
  • v. 4.2 (30/05/2023)
  • PDF | 2,4 MB
  • Download
FISPE13E23TPIEX06
  • v. 6.0 (30/05/2023)
  • PDF | 1,1 MB
  • Download
FISPPWSFRFEXX01
  • v. 1.0 (22/03/2024)
  • PDF | 1,1 MB
  • Download
MAED213TP_EN
  • v. 4.3 (25/05/2023)
  • PDF | 3,4 MB
  • Download
APEKE12E13TP
  • v. 06 (21/03/2023)
  • ZIP | 2,4 MB
  • Download
CEEKE13E23TP
  • v. 1.0 (17/10/2022)
  • PDF | 851,7 KB
  • Download
CEEKPWSFRUSB
  • v. 1.0 (17/10/2023)
  • PDF | 945,7 KB
  • Download
DSEKE13TPPWSUSBFR
close
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.