4 fold RGBW Led dimmer

DIN-Rail mount modules

CODE: EK-GC1-TP

Description

The Ekinex® EK-GC1-TP 4-fold RGBW LED dimmer allows to regulate independently the light intensity emitted by 4 LED strips at 12/24 Vdc or, alternatively, to regulate the light intensity and the colour emitted by a RGB or RGBW LED strip. The device is suitable for use with LED strips powered at constant voltage. The selection of the colour can be made optionally in HSV or RGB mode. Scenarios, predefined sequences, sequence repetition and random functions are available; the dimming speed and the holding time are programmable. The device is fitted with membrane pushbuttons for manual command and LEDs for status indication; a pushbutton allows the switching between automatic or manual operation modes. The device integrates a KNX bus communication module and is realised for mounting on a standard 35 mm DIN-rail. The device is powered by the KNX bus and requires an additional 12...30 Vdc to supply the controlled loads.

Technical data
Power supply
  • Voltage (strip LED): max 30 Vdc, 16 A
  • Voltage (control): 30 Vdc by KNX bus
Outputs
  • Number: 4
  • Load current for each channel: 4 A
Delivery
Delivery includes a terminal block for connection to the bus.
Functions / Features
  • Plastic casing
  • Frontal programming pushbutton and LED
  • Membrane keyboard with LEDs for status indication of outputs
  • Pushbutton for switching operating mode (normal / programming)
  • CH pushbutton for individual or simultaneous channels control
  • HSV / RGB pushbutton colour control mode
  • Auxiliary dry contact to disconnect load power supply during standby
  • Connection to bus line with KNX terminal block
  • Connection of outputs and 12-30 Vdc power supply with screw terminals
  • Installation on 35 mm rail (according to EN 60715)
  • 4 modular units (1 MU = 18 mm)
  • IP20 protection degree (installed device)
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKGC1TP##.knxprod (## = release).

Download
Datasheet
Instructions
Application manual
Application software for ETS - v.02 (30/11/2018)
Drawing
Conformity declaration - v.1.0 (30/01/2019)
close
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.