Functions / Features
- ON/OFF control and light intensity adjustment of individual or grouped lighting fixtures
- Selection of PWM output frequency from ETS, from 250 Hz to 6 kHz
- Fade-in time on and off, minimum and maximum brightness levels, linear or logarithmic adjustment curve settable from ETS
- Soft or instant on and off, with settable delay
- Possibility of connecting outputs in parallel to increase output power
- Configuration of behaviour after power restoration, bus ON/OFF, download via ETS
- Folds can be set from ETS as independent, in parallel or with copy function from another fold
- Lock function, forced operation, staircase lighting, scenarios, night mode, counter and logic functions for each fold, settable from ETS
- Power failure alarm
- Auxiliary output function via relay (external) with status indication via KNX
- Installer mode (with KNX bus active): pressing the programming button for approx. 2 seconds activates/deactivates the programming LED and load flashing at approx. 1 s intervals
Environmental conditions and other characteristics
- Operating temperature: -20 °C ... + 40 °C
- Storage temperature: -40 °C ... + 60 °C
- Transport temperature: -40 °C ... + 60 °C
- Max. rated temperature of the enclosure (tc): 50 °C
- Relative humidity: 91% non-condensing
- Degree of protection: IP00 (IP20 in junction box or electrical panel)
- Power supply and load wiring: 0.05 to 2.5 mm2 (30 to 12 AWG)
- KNX bus wiring: 0.6 to 0.8 mm2 (19 to 18 AWG)
- Stripping: 8.0 mm
- Plastic enclosure
- Device for mounting in flush-mounted box or on DIN rail (with accessory supplied)
- Weight: 37 g
- Dimensions (WxHxD): 53 x 61 x 29 mm
.png)
.png)
