Functions / Features
- Plastic casing
- Device for free installation in junction boxes or on walls
- Mounting on 35 mm profile rail (using the special bracket included)
- IP20 protection rating (device installed)
- ON/OFF control and brightness adjustment of individual or grouped lighting fixtures, Tunable White and DimToWarm
- Selection of PWM output frequency from ETS from 250 Hz to 6 kHz
- Fade-in and fade-out time, minimum and maximum brightness level, linear or logarithmic adjustment curve can be set from ETS
- Soft or instant on/off, with adjustable delay
- Possibility of parallel connection of outputs to increase output power
- Configuration of behavior after power restoration, bus ON/OFF, download via ETS
- Channels can be set from ETS as independent, parallel, or Tunable White
- Lock function, forced operation, staircase light, scenarios, night mode, meter, and logic functions for each channel, settable from ETS
- Power failure alarm
- Auxiliary output function via relay (external) with status indication via KNX
- Installer mode (with KNX bus active): pressing the programming button for about 2 seconds activates/deactivates the programming LED and load flashing approximately every 1 second
.png)
.png)
