Actuator / controller 8-fold for electrothermal valve drives

DIN-Rail mount modules

CODE: EK-HE1-TP

Description

The Ekinex® EK-HE1-TP actuator / controller allows to control electrothermal actuators or servomotors in hydronic systems for room heating and / or cooling. The device can perform the function of simple actuator in combination with one or more KNX room thermostats or that of actuator / controller with acquisition of the temperature value by one or more KNX sensors. The device is suitable for 2 or 4-pipe hydraulic distribution systems with ON / OFF control of electrothermal shut-off valve actuators. The device is fitted with membrane pushbuttons for manual command and LED’s for status indication; a pushbutton allows to switch between automatic and manual operation modes. The device integrates a KNX bus communication module and is realized for mounting on a standard 35 mm DIN-rail. The device is supplied by the KNX bus and requires an additional 230 Vac power supply to operate.

Technical data
Power supply
  • Voltage (loads) 230 Vac 50/60 Hz
  • Voltage (electronics) 30 Vdc by KNX bus
Outputs
  • 8 TRIAC relays to control ON / OFF zone valve drives
Delivery

Delivery includes a terminal block for connection to the bus.

Functions / Features
  • Plastic casing
  • Frontal programming pushbutton and LED
  • Membrane keyboard with LED’s for status indication
  • Pushbutton for switching operating mode (normal / programming)
  • Connection to bus line with KNX terminal block
  • Connection of outputs and 230 Vac power supply with screw terminals
  • Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
  • Overvoltage class III (according to EN 60664-1)
  • Pollution degree 2 (according to IEC 60664-1)
  • 35 mm rail mounting (according to EN 60715)
  • 4 modular units (1 MU = 18 mm)
  • IP20 protection degree (installed device)
  • Weight 160 g
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKHE1TP##.knxprod (## = release). 

STEKHE1TP_EN_EKINEX_SPA
FISPHE1TPIEXX00_EKINEX_SPA
MAEKHE1TP_EN
  • v. 1.2 (04/05/2021)
  • PDF | 2,7 MB
  • Download
APEKHE1TP01
  • v. 0.1 (17/05/2021)
  • KNXPROD | 168,7 KB
  • Download
CEEKHE1TP
KNX_Certification_EK-HE1-TP
DSEKHE1TP
close
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.