Card holder

Hotel solutions


  • Card holder Card holder
  • Card holder Card holder
  • Card holder Card holder
  • Card holder Card holder
  • Card holder Card holder
  • Card holder Card holder
  • Form
  • Flank
  • 'NF
  • Deep
  • Surface
  • 3D view

The Ekinex® EK-TH2-TP card holder with RFID technology is used for presence detection in combination with the EK-TR2-TP card reader. It is equipped with a bistable relay (4A@24Vac/dc), an input for potential-free contacts and a front signalling LED (white). The device has an integrated KNX bus communication module and is designed for mounting in a flush-mounted wall box; it is supplied with SELV voltage via the KNX bus and requires a 12-24 Vac/dc auxiliary power supply.

Technical data
  • 30 Vdc power supply via KNX bus
  • Auxiliary power supply 12-24 Vac/dc
  • Current consumption from bus < 10 mA

The scope of supply includes a terminal for connection to the bus line, a plastic bracket for mounting on a round or square box (hole spacing 60 mm) and two pairs of screws.

  • Smart-card EK-TCE-10 (Ekinex® logo in black, pack of 10 cards) or EK-TCC-10 (customised with customer logo, pack of 10 cards)
  • square plate with 45 x 45 mm window
  • plastic adapter
Functions / Features
  • Presence detection via bus and communication to supervisory system via KNX TP bus (twisted pair)
  • Presence enabling after insertion of card in front pocket
  • Accommodation guest management based on reservation and check-in/check-out period; service user management based on time slots and passe-partout
  • Programmable output based on card validation or as actuator activated by KNX telegrams Delay on card withdrawal configurable for courtesy light management
  • Binary input available for connection of conventional push button (with switching, dimming or roller shutter/shutter function) or signalling contact (e.g. window opening)
  • Front white LED: flashing signal when card not inserted, off when card inserted; LED control via KNX bus telegrams possible
  • Notification of detected presence events to supervisory system with memory buffer
  • Plastic case
  • Connection to bus line via KNX terminal
  • Recessed wall mounting on round box
  • Degree of protection IP20 (installed)
  • Weight approx. 50 g (with mounting bracket)
Configurationa and commissioning

The ekinex accédo software, dedicated to the management of accommodation and hospitality facilities (hotels, residences, guest houses or bed&breakfasts), is required for the programming of access control functions and card programming.

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.