8-fold pushbutton with backlit text/symbols and proximity sensor

20venti Series

CODE: EK-E2E-TP-8

  • 8-fold pushbutton with backlit text/symbols and proximity sensor 8-fold pushbutton with backlit text/symbols and proximity sensor
  • 8-fold pushbutton with backlit text/symbols and proximity sensor 8-fold pushbutton with backlit text/symbols and proximity sensor
  • 8-fold pushbutton with backlit text/symbols and proximity sensor 8-fold pushbutton with backlit text/symbols and proximity sensor
  • Deep
  • Surface
  • 3D view
Description

The Ekinex® 20venti series 8-fold pushbutton is used for on/off control of utility devices, dimming of luminaires, control of motorized drives for roller shutters or other programmable control functions. Thanks to the integrated temperature sensor, the button can act as a temperature controller for a room or zone. RGB LED for each rocker. The switch has an integrated KNX bus communication module and is designed for installation in a flush-mounted wall box.

Technical data
  • 30 Vdc power supply by KNX bus
  • Current consumption from bus < 17 mA
Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

  • 8 rectangular 30 x 15 mm plastic rockers with or without backlit text/symbol
  • square plate of the Deep and Surface version with 60 x 60 mm window a plastic adapter
  • a metal support for installation onto round or square mounting box (fixing holes 60 mm apart)
Functions / Features
  • 8 fold version (possibility to configure up to 8 independent functions) 
  • RGB LED for each freely programmable button 
  • Integrated temperature sensor 
  • Integrated proximity sensor
  • Room thermostat function 
  • Plastic casing 
  • Connection to bus line with KNX terminal block 
  • Wall-mounting installation on round or square wall box 
  • IP20 protection degree (installed)
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKE2ETP##.knxprod (## = release).

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
STEKE2ETP4_EN
  • v. 1.0 (01/03/2024)
  • PDF | 2 MB
  • Download
FISPE2ETP48IEX00
  • v. 1 (01/03/2024)
  • PDF | 1,3 MB
  • Download
MAEKE2ETP4_EN
  • v. 1.1 (08/05/2024)
  • PDF | 4,1 MB
  • Download
APEKE20-E2E-TP4-8
  • v. 0.1 (01/03/2024)
  • ZIP | 2,2 MB
  • Download
DSEKE20TP8TP
CEEKE2ETP48
  • v. 1.0 (22/01/2024)
  • PDF | 845,5 KB
  • Download
KNX_Certification_EK-E20-TP-8T-PN
  • v. 5.0 (01/08/2023)
  • PDF | 774,4 KB
  • Download
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.