DALI dimmer 12/48 Vdc 4 channels multifunction

CODE: EK-GD1-DL-4-L-01

Description

The EKGD1-DL-4-L-01 DALI 2 standard 4-channel dimmer is powered by 12/24/48 Vdc with flicker-free PWM dimming and allows control of brightness, dynamic white (TW) and RGBW colour (DT6 and DT8) for low-voltage LEDs. The inputs are DALI 2 bus type, compliant with the IEC 62386 standard. The operating mode settings are made via a local dip-switch selector.

Technical data

Inputs

Constant input voltage: 12 / 24 / 48 Vdc
Supply voltage: 8 to 53 Vdc

Outputs

Number of outputs: 4
PWM voltage output 12/24/48 Vdc
Load type: single colour, Tunable White, RGB, RGBW
Output current: 0A to 8A per channel
Output current in single-channel mode from 0A to 32A (1536W @48Vdc)
Nominal power per output @12Vdc: 96 W
Nominal power per output @24Vdc: 192 W
Nominal power per output @48Vdc: 384 W

Control

Control types: DALI2 DT6 DT8, 0-10V / 1-10V, PUSH, linear potentiometer, switch, sensor, phase cut, DMX512A-RDM, BLE

The graph shows the flickering phenomenon as a function of frequency, measured across the entire dimming range. The results show the low-risk zone (yellow) and the zone with no observable effect (green). Defined by IEEE 1789-20156.

Functions / Features

Dimmer with isolated PUSH inputs, active and passive 0-10/1-10 potentiometer, switch, sensor, phase cut, DALI2 DT6, DALI2 DT8, DMX512ARDM, BLE
Master/slave functionality on DMX512A-RDM
LEDs indicating the status of the output channels and dimmer configuration
PWM frequency: 390Hz - 3000Hz - 10000Hz
Protection against polarity reversal, short circuit, open circuit and voltage spikes
Dip-switch selector for setting the operating mode

Configurationa and commissioning

The configuration and commissioning of the device must be carried out in accordance with the building automation system design prepared by a qualified professional.

Datasheet

STEKGD1DL4L01_EN

v. 1.0 (27/02/2026)
PDF | 7,3 MB
Download

Instructions

FISPEKGD1DL4L01IE0

v. 0 (19/03/2026)
PDF | 1,2 MB
Download

CE Conformity declaration

CEEKGD1DL4L01

v. 1.0 (12/05/2026)
ZIP | 757,5 KB
Download

UKCA statement

UKCADCGD1DL4L01

v. 1.0 (25/02/2026)
PDF | 161,5 KB
Download

Drawing

DQEKGD1DL4L01

DXF | 1,5 MB
Download

This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.