-
Plastic casing
-
Buttons and LEDs for control and output status indication on the front panel
-
Button and LED for programming or manual/automatic operation on the front panel
-
Bus line connection via KNX terminal
-
Connection of loads to outputs via screw terminals with cable cross-section up to 4 mm2
-
Connection of loads to inputs via screw terminals with cable cross-section up to 2.5 mm2
-
Connection of different phases on adjacent outputs
-
Device with 4 modular units (1 MU = 18 mm)
- Bus supply voltage: 21-30 Vdc
- KNX bus current consumption: 10 mA standby, 54 mA at start-up
- Loads per output: LED lamps max 400 W, resistive 4000 W, inductive 1500 VA, capacitive 200 µF
- Max. total current: 64 A
- Max. input cable length: 100 m (shielded cable above 1.5 m)
- Protection degree IP20 (installed device)
- Operating temperature: -5 ... +45 °C
- Storage temperature: -25 ... +55 °C
- Transport temperature: -25 ... +70 °C
- Relative humidity: max 95% non-condensing
- Weight 277 g
- Dimensions (WxHxD): 71 x 90 x 63 mm


.png)
.png)
.png)

