CODE: EK-ED2-TP
The 4-fold pushbutton of Ekinex® FF series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function. Thanks to the integrated temperature sensor, the pushbutton can work as a thermostat for a room or a zone. The LEDs can be chosen in the colour combinations blue / green or white / red. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.
Delivery includes a terminal block for connection to the bus, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) and two pairs of fixing screws.
The following accessories are available to be ordered separately:
| Code | LED colours | Mounting | Side profile |
| EK-ED2-TP | blue / green | with square frame Form or Flank version | black |
| EK-ED2-TP-RW | red / white | ||
| EK-ED2-TP-BG-NF | blue / green | without frame (‘NF version) | |
| EK-ED2-TP-RW-NF | red / white | ||
| EK-ED2-TP-BG-NFW | blue / green | white | |
| EK-ED2-TP-RW-NFW | red / white |
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKED2TP##.knxprod (## = release). Available languages: English, French, German, Italian
Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.
